Thank you for visiting The Mine. Enjoy what’s new with 15% off your first purchase. GO
Enter your email to get your unique code:
Check your inbox (and your spam folder) for your code!
*Excludes select manufacturers. You are consenting to receive marketing emails. You can unsubscribe any time by using the unsubscribe link in our marketing emails, contacting us at The Mine, 11410 NE 122nd Way, Ste. 200, Kirkland WA 98034 or via email at email@example.com.
EARLY JULY 4TH EVENT! SAVE 15% SITEWIDE W/ CODE FREEDOM15 Details
*This product is a special order item and available to purchase online or by speaking to an associate at this selected store. Choose from store pick-up or home delivery. Standard charges apply for home delivery. (learn more)
I installed this in our living room. It matches the brown aluminum windows and spreads lights throughout the room. I switched the halogen bulbs with LED and bought an extra sixth lamp. The LEDs don't cast light back into the housing so they don't like the ceiling but I prefer the energy efficiency and this way I can have six lights without exceeding 250 W
How would you rank the quality of instructions and ease of installation/set-up?
How would you rank the overall product quality?
How would you rank the overall product value?
Was this review helpful to you?
Great product- well made, good looking, obvious quality
We removed an L-shaped breakfast counter and put in an island about 4ft away. Installed the new power canopy over the hole of the old recessed fixture that had lit the counter (rather than running wires above the ceiling and patching the hole that would have been left). Began the monorail track 2ft behind the canopy and ran it in a 90 degree arc to center over one end of the new island....then in a sweeping series of "S" curves above the 60 inch island, with a final 90 degree arced run to mirror the initial arc.
Found it very easy to free-form the track using only my hands. I used tin cutters to snip off about an inch of the center rail plate that protrudes after bending each section. Used all 11 stand offs (as several are required to support the S curves). CAUTION: be careful about orientation of the track....these fixtures can rotate up and down, but cannot be rotated 180 degrees right or left to aim the spots!! After the heads were installed on the finished track, I had to readjust the track connectors and gently "twist" the rails on either side of the connectors to guarantee electrical contact was carried to the next rail section (just work out from the power source).
Three heads point nearly straight down onto the island. One points 60 degrees down to the wall opposite and one is mounted on the 2 ft section behind the power canopy to provide visual balance.
We intend to convert some (or all) fixtures to dimable GU 10 LED bulbs (reducing the total draw to under 100 watts). We may then hang 2 down pendants over the island and redirect 3 fixtures currently aimed downward. With LED bulbs the total wattage should still be less than 3 of the halogen bulbs included.
Great project for the money and avoids the hassles of transformers for a 12 V track
Went up just fine. Looks great. Put them in an office break-room. Color of bulbs is a bit more yellow than daylight florescent; But, it is fine, as every one turns the florescent off now, because they love these new lights! I bought them just for accent lights, but the staff loves them so much that I may have to add another one, and get rid of the florescent. As the room I have in needs more light than these can produce.
This was the 2nd Kovak of same design. I had the same problem installing them. If you assemble the parts on a flat surface making sure the contacts in the track don't move when pushing them together it will work fine. The contacts have a problem sliding so that the positive or negative contacts don't conduct electricity to the second track. Lights won't work. It is really difficult to rectify this problem up on a ladder, with stanchions fastened to the ceiling. It takes 2 people to put it up on ceiling. I drew the pattern on a sheet of paper and taped to the ceiling. I used a drill to place the holes where I wanted them for the stanchions, took the pattern down, and assembled the stanchions first. Then put the track up, and it went without a hitch. Nice looking and really lights up the hallway. I do like these lights.